|
that clear water is healthy water and to try purely to
achieve this goal.
pH
The pH of the water is a measurement of acidity. It has a range from 0 to 14. If
the pH is below 7 it is acidic, above 7 it is alkaline and equal to 7 it is neutral.
A pond’s pH will change naturally from time to time due to filter performance, KH
(buffering) and levels of carbon dioxide in the water. The carbon dioxide levels come
from fish metabolism, plant respiration, pollution and organic acids in the water and
all lower the pH level of the pond water. Impurities in tap water also lower the pH level
and therefore it is advisable not to use tap water if possible. Slight variations in the pH
level are quite common and will not harm your fish but try to stick with a pH level between
6.8 to 9.0, these levels are ideal for goldfish and koi.
Ammonia
Ammonia is converted into Nitrite by Nitrosomonas (Nitrosomonas is a genus of
ammonia-oxidizing proteobacteria ) Nitrite is converted into Nitrate (plant food) by
Nitrobacter (Nitrobacter is a bacteria that is an important part of the nitrogen cycle ).
Nitrites are highly toxic to fish and cause breathing difficulties. Nitrites are only controlled
by water changes and correct filtration. Algae in the water consume nitrates as well as plants.
To encourage your plants to send out roots and consume waterborne nitrates and phosphates limit
the amount of soil you use for your potted plants or even use a soil less media. The amount
of food you give you fish has a big influence on the amount of nitrates present. Only feed enough
food that is eaten within a couple of minutes. The amount of fish you have in the pond is also
a consideration, never overstock your pond as this increases nitrates and the possibility of
ill health to your fish.
Alkalinity
Alkalinity is the ability of water to resist (buffer) changes in pH. This is often referred to as
KH buffering. Alkalinity (also known as Carbonate Hardness or KH) is the measure of carbonate
and bicarbonate ion concentrations. An alkalinity value of 100 to 300 ppm ( parts per million )
is good. At these levels of Alkalinity the pond water will provide greater buffering and produce
a more stable pH. If alkalinity is less than 50 ppm then wide pH swings are common and a filter
problem is imminent.
Checking the quality of your pond water is a task a pond keeper
should do on a monthly basis. If the water quality is not within the specification above contact your
local pond supplier quoting these values
|